一、高温老化试验箱的用途：High temperature aging test chamber
高温老化试验箱可以用来考核和确定电工、电子产品或材料在温度循环变化，产品表面产生高温老化环境条件下贮存和使用的适应性。
High temperature aging test chamber can be used to assess and determine theelectrician, electronic product or
material changes in temperature cycle, the product surface to produce high temperature aging environment adaptability
under the condition of storage and use.
二、高温老化试验箱使用条件：Conditions of use
1、环境温度：5℃～＋30℃
2、环境湿度：≤90%
3、电源要求：AC 220（±10%）V/50HZ单相三线 AC 380（±10%）V/50HZ 三相五线制
4、预装容量：5～10KW
1.Ambient temperature: 5 ℃～+ 30℃
2.The environment humidity: 90% or less
3.Power supply: AC 220 (plus or minus 10%) V/50 hz single-phase three-wire AC 380V/50
hz (+/-10%) three-phase five wire system
4.The installed capacity: 5～10KW
三、高温老化试验箱技术参数：
1、温度范围：室温+10℃～450℃
2、温度均匀度：±2℃
3、温度波动度：±1℃
4、控温精度：1℃
5、升温速率：7～11℃/min
6、时间设定范围：1～9999 秒、分钟、小时可调
7、电源电压：AC1 220V/50HZ AC3 380V/50HZ
8、室体噪音：＜30dB
1. Temperature: room temperature + 10 ℃~ 450 ℃
2. The temperature uniformity: plus or minus 2 ℃
3. The degree of temperature fluctuation: + / - 1 ℃
4. The temperature control precision: 1℃
5. the heating rate: 7 ~ 11 ℃ / min
6. time setting range: 1 ~ 9999 seconds, minutes, hours is adjustable
7. the power supply voltage: 220 v / 380 v / 50 hz AC3 AC1 50 hz
8. room noise: < 30 db
