【求助】黑群918+晖主板自带万兆网卡无法识别【黑群晖吧】

918+ DSM 7.1-42661 Update 1
主板自带两个网卡一个千兆电口一个万兆光口目前只能识别千兆电口。
板载万兆光口型号： inter 82599EN
---------grub.cfg 中默认启动项参数为 netif_num=2
linux /zImage HddHotplug=0 withefi console=ttyS0,115200n8 netif_num=2 syno_hdd_detect=0 syno_port_thaw=1 vender_format_version=2 mac2=0011327BA936 earlyprintk mac1=0011327BA935 syno_hdd_powerup_seq=1 pid=0x1000 log_buf_len=32M syno_hw_version=DS918+ vid=0x090C earlycon=uart8250,io,0x3f8,115200n8 sn=1780PDN349110 elevator=elevator root=/dev/md0 loglevel=15 DiskIdxMap=0006 SataPortMap=62 SasIdxMap=0
--------grep maxlan /etc.defaults/synoinfo.conf 尝试改成3个网卡也不行
maxlanport="3"
-------- lspci 信息
lspci
0000:00:00.0 Class 0600: Device 8086:590f (rev 06)
0000:00:01.0 Class 0604: Device 8086:1901 (rev 06)
0000:00:02.0 Class 0300: Device 8086:5912 (rev 04)
0000:00:08.0 Class 0880: Device 8086:1911
0000:00:14.0 Class 0c03: Device 8086:a12f (rev 31)
0000:00:16.0 Class 0780: Device 8086:a13a (rev 31)
0000:00:17.0 Class 0106: Device 8086:a102 (rev 31)
0000:00:1c.0 Class 0604: Device 8086:a114 (rev f1)
0000:00:1d.0 Class 0604: Device 8086:a118 (rev f1)
0000:00:1d.1 Class 0604: Device 8086:a119 (rev f1)
0000:00:1f.0 Class 0601: Device 8086:a148 (rev 31)
0000:00:1f.2 Class 0580: Device 8086:a121 (rev 31)
0000:00:1f.3 Class 0403: Device 8086:a170 (rev 31)
0000:00:1f.4 Class 0c05: Device 8086:a123 (rev 31)
0000:02:00.0 Class 0200: Device 8086:10fb (rev 01)
0000:03:00.0 Class 0200: Device 10ec:8168 (rev 15)
0000:04:00.0 Class 0106: Device 1b21:1064 (rev 02)
0001:00:12.0 Class 0106: Device 8086:5ae3
0001:00:13.0 Class 0000: Device 8086:5ad8
0001:00:14.0 Class 0000: Device 8086:5ad6
0001:00:15.0 Class 0c03: Device 8086:5aa8
0001:00:16.0 Class 1180: Device 8086:5aac
0001:00:18.0 Class 1180: Device 8086:5abc
0001:00:19.0 Class 1180: Device 8086:5ac6
0001:00:19.2 Class 1180: Device 8086:5ac6
0001:00:1f.0 Class 0c05: Device 8086:5ad4
0001:00:1f.1 Class 0c05: Device 8086:5ad4
0001:01:00.0 Class 0106: Device 1b4b:9215 (rev 11)
0001:02:00.0 Class 0200: Device 8086:1539 (rev 03)
0001:03:00.0 Class 0200: Device 8086:1539 (rev 03)

送TA礼物

IP属地:广东

1楼2023-03-07 00:58回复

ash-4.4# dmesg | head -100
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.180+ (root@build15) (gcc version 8.5.0 (GCC) ) #42661 SMP Fri Apr 1 15:33:06 CST 2022
[ 0.000000] Command line: BOOT_IMAGE=/zImage HddHotplug=0 withefi console=ttyS0,115200n8 netif_num=2 syno_hdd_detect=0 syno_port_thaw=1 vender_format_version=2 mac2=0011327BA936 earlyprintk mac1=0011327BA935 syno_hdd_powerup_seq=1 pid=0x1000 log_buf_len=32M syno_hw_version=DS918+ vid=0x090C earlycon=uart8250,io,0x3f8,115200n8 sn=1780PDN349110 elevator=elevator root=/dev/md0 loglevel=15 DiskIdxMap=0006 SataPortMap=62 SasIdxMap=0
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: xstate_offset[3]: 960, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 1024, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x08: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x10: 'MPX CSR'
[ 0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 1088 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000085a09fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000085a0a000-0x0000000085a0afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000085a0b000-0x0000000085a0bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000085a0c000-0x000000008c487fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008c488000-0x000000008c789fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008c78a000-0x000000008c8f1fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008c8f2000-0x000000008cf98fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008cf99000-0x000000008d3b3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008d3b4000-0x000000008d3fefff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000008d3ff000-0x000000008d3fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008d400000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[ 0.000000] earlycon: Early serial console at I/O port 0x3f8 (options '115200n8')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.50 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0x8cbf2000 ACPI=0x8cbf2000 SMBIOS=0x8d347000 SMBIOS 3.0=0x8d346000 MPS=0xfca10 ESRT=0x89766b98
[ 0.000000] esrt: Reserving ESRT space from 0x0000000089766b98 to 0x0000000089766bd0.
[ 0.000000] SMBIOS 3.0.0 present.
[ 0.000000] Kernel/User page tables isolation: disabled
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 1 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 2 base 0090000000 mask 7FF0000000 uncachable
[ 0.000000] 3 base 008E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 008D800000 mask 7FFF800000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
[ 0.000000] e820: last_pfn = 0x8d400 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 28672
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x0446b000, 0x0446bfff] PGTABLE
[ 0.000000] BRK [0x0446c000, 0x0446cfff] PGTABLE
[ 0.000000] BRK [0x0446d000, 0x0446dfff] PGTABLE
[ 0.000000] BRK [0x0446e000, 0x0446efff] PGTABLE
[ 0.000000] BRK [0x0446f000, 0x0446ffff] PGTABLE
[ 0.000000] BRK [0x04470000, 0x04470fff] PGTABLE
[ 0.000000] log_buf_len: 33554432 bytes
[ 0.000000] early log buf free: 125676(95%)
[ 0.000000] RAMDISK: [mem 0x34ca3000-0x36648fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000008CBF2000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000008CBF20B0 0000DC (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000008CC18D58 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000008CBF2220 026B31 (v02 ALASKA A M I 01072009 INTL 20160422)
[ 0.000000] ACPI: FACS 0x000000008CF98C40 000040
[ 0.000000] ACPI: APIC 0x000000008CC18E70 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000008CC18EF8 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000008CC18F40 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000008CC18F80 0003BC (v01 SataRe SataTabl 00001000 INTL 20160422)
[ 0.000000] ACPI: FIDT 0x000000008CC19340 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x000000008CC193E0 003159 (v02 SaSsdt SaSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008CC1C540 002599 (v02 PegSsd PegSsdt 00001000 INTL 20160422)
[ 0.000000] ACPI: HPET 0x000000008CC1EAE0 000038 (v01 INTEL KBL 00000001 MSFT 0000005F)
[ 0.000000] ACPI: SSDT 0x000000008CC1EB18 000024 (v02 INTEL OEM_RTD3 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008CC1EB40 000DE5 (v02 INTEL Ther_Rvp 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008CC1F928 000A2E (v02 INTEL xh_rvp08 00000000 INTL 20160422)
[ 0.000000] ACPI: UEFI 0x000000008CC20358 000042 (v01 INTEL EDK2 00000002 01000013)
[ 0.000000] ACPI: SSDT 0x000000008CC203A0 00179D (v02 CpuRef CpuSsdt 00003000 INTL 20160422)
[ 0.000000] ACPI: LPIT 0x000000008CC21B40 000094 (v01 INTEL KBL 00000000 MSFT 0000005F)
[ 0.000000] ACPI: WSMT 0x000000008CC21BD8 000028 (v01 INTEL KBL 00000000 MSFT 0000005F)

IP属地:广东

2楼2023-03-07 01:02

ash-4.4# dmesg | head -200 | tail -100
[ 0.000000] ACPI: SSDT 0x000000008CC21C00 000141 (v02 INTEL HdaDsp 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008CC21D48 00029F (v02 INTEL sensrhub 00000000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008CC21FE8 003002 (v02 INTEL PtidDevc 00001000 INTL 20160422)
[ 0.000000] ACPI: SSDT 0x000000008CC24FF0 000215 (v02 INTEL TbtTypeC 00000000 INTL 20160422)
[ 0.000000] ACPI: DBGP 0x000000008CC25208 000034 (v01 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: DBG2 0x000000008CC25240 000054 (v00 INTEL 00000002 MSFT 0000005F)
[ 0.000000] ACPI: BGRT 0x000000008CC25298 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000026effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009efff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000085a09fff]
[ 0.000000] node 0: [mem 0x0000000085a0c000-0x000000008c487fff]
[ 0.000000] node 0: [mem 0x000000008c78a000-0x000000008c8f1fff]
[ 0.000000] node 0: [mem 0x000000008d3ff000-0x000000008d3fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000026effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[ 0.000000] On node 0 totalpages: 2078092
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 43 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 8920 pages used for memmap
[ 0.000000] DMA32 zone: 570863 pages, LIFO batch:31
[ 0.000000] Normal zone: 23488 pages used for memmap
[ 0.000000] Normal zone: 1503232 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at [mem 0x8e000000-0x8fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x85a0a000-0x85a0afff]
[ 0.000000] PM: Registered nosave memory: [mem 0x85a0b000-0x85a0bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c488000-0x8c789fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c8f2000-0x8cf98fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8cf99000-0x8d3b3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d3b4000-0x8d3fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8d400000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0x90000000-0xdfffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88026cc00000 s95128 r8192 d31848 u524288
[ 0.000000] pcpu-alloc: s95128 r8192 d31848 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2045577
[ 0.000000] Kernel command line: BOOT_IMAGE=/zImage HddHotplug=0 withefi console=ttyS0,115200n8 netif_num=2 syno_hdd_detect=0 syno_port_thaw=1 vender_format_version=2 mac2=0011327BA936 earlyprintk mac1=0011327BA935 syno_hdd_powerup_seq=1 pid=0x1000 log_buf_len=32M syno_hw_version=DS918+ vid=0x090C earlycon=uart8250,io,0x3f8,115200n8 sn=1780PDN349110 elevator=elevator root=/dev/md0 loglevel=15 DiskIdxMap=0006 SataPortMap=62 SasIdxMap=0
[ 0.000000] Internal netif num: 2
[ 0.000000] SYNO GPIO hdd detect pin: 0
[ 0.000000] Vender format version: 2
[ 0.000000] Mac2: 0011327BA936
[ 0.000000] Mac1: 0011327BA935
[ 0.000000] Power on seq num: 1
[ 0.000000] Synology Hardware Version: DS918+
[ 0.000000] Serial Number: 1780PDN349110
[ 0.000000] Disk Index Map: 0006
[ 0.000000] Sata Port Map: 62
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Memory: 8006168K/8312368K available (5631K kernel code, 864K rwdata, 1788K rodata, 912K init, 660K bss, 306200K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:4352 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 3407.971 MHz processor

IP属地:广东

3楼2023-03-07 01:04

ash-4.4# dmesg | head -300 | tail -100
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6815.94 BogoMIPS (lpj=3407971)
[ 0.012142] pid_max: default: 32768 minimum: 301
[ 0.017432] ACPI: Core revision 20150930
[ 0.049235] ACPI: 12 ACPI AML tables successfully acquired and loaded
[ 0.058175] Security Framework initialized
[ 0.062892] AppArmor: AppArmor initialized
[ 0.067642] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.075578] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.084172] Initializing cgroup subsys io
[ 0.088770] Initializing cgroup subsys memory
[ 0.093762] Initializing cgroup subsys devices
[ 0.098822] Initializing cgroup subsys freezer
[ 0.103950] CPU: Physical Processor ID: 0
[ 0.108589] CPU: Processor Core ID: 0
[ 0.112767] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.119666] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.128856] CPU0: Thermal monitoring enabled (TM1)
[ 0.134377] process: using mwait in idle threads
[ 0.139686] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[ 0.145916] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[ 0.152860] Speculative Store Bypass: Vulnerable
[ 0.158458] Freeing SMP alternatives memory: 24K
[ 0.168775] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.185703] TSC deadline timer enabled
[ 0.190031] smpboot: CPU0: Intel(R) Core(TM) i3-7100T CPU @ 3.40GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[ 0.201461] Performance Events: PEBS fmt3+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.213125] ... version: 4
[ 0.217712] ... bit width: 48
[ 0.222383] ... generic registers: 4
[ 0.226942] ... value mask: 0000ffffffffffff
[ 0.232975] ... max period: 00007fffffffffff
[ 0.239076] ... fixed-purpose events: 3
[ 0.243688] ... event mask: 000000070000000f
[ 0.249902] x86: Booting SMP configuration:
[ 0.254740] .... node #0, CPUs: #1 #2 #3
[ 0.269963] x86: Booted up 1 node, 4 CPUs
[ 0.274751] smpboot: Total of 4 processors activated (27263.76 BogoMIPS)
[ 0.284611] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.293953] devtmpfs: initialized
[ 0.297947] PM: Registering ACPI NVS region [mem 0x85a0a000-0x85a0afff] (4096 bytes)
[ 0.306839] PM: Registering ACPI NVS region [mem 0x8c8f2000-0x8cf98fff] (6975488 bytes)
[ 0.316087] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.327269] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.334365] pinctrl core: initialized pinctrl subsystem
[ 0.340402] NET: Registered protocol family 16
[ 0.350552] cpuidle: using governor ladder
[ 0.361224] cpuidle: using governor menu
[ 0.365761] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.374418] ACPI: bus type PCI registered
[ 0.379088] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.389740] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.397547] PCI: Using configuration type 1 for base access
[ 0.409169] ACPI: Added _OSI(Module Device)
[ 0.413974] ACPI: Added _OSI(Processor Device)
[ 0.419104] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.424460] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.436314] ACPI: Executed 38 blocks of module-level executable AML code
[ 0.448315] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.457538] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[ 0.465659] ACPI: Interpreter enabled
[ 0.469917] ACPI: (supports S0 S4 S5)
[ 0.474116] ACPI: Using IOAPIC for interrupt routing
[ 0.479880] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.491963] ACPI: Power Resource [PG00] (on)
[ 0.497164] ACPI: Power Resource [PG01] (on)
[ 0.502338] ACPI: Power Resource [PG02] (on)
[ 0.508447] ACPI: Power Resource [WRST] (on)
[ 0.513626] ACPI: Power Resource [WRST] (on)
[ 0.518714] ACPI: Power Resource [WRST] (on)
[ 0.523823] ACPI: Power Resource [WRST] (on)
[ 0.528938] ACPI: Power Resource [WRST] (on)
[ 0.534087] ACPI: Power Resource [WRST] (on)
[ 0.539173] ACPI: Power Resource [WRST] (on)
[ 0.544330] ACPI: Power Resource [WRST] (on)
[ 0.549428] ACPI: Power Resource [WRST] (on)
[ 0.554534] ACPI: Power Resource [WRST] (on)
[ 0.559633] ACPI: Power Resource [WRST] (on)
[ 0.564761] ACPI: Power Resource [WRST] (on)
[ 0.569874] ACPI: Power Resource [WRST] (on)
[ 0.574980] ACPI: Power Resource [WRST] (on)
[ 0.580110] ACPI: Power Resource [WRST] (on)
[ 0.585285] ACPI: Power Resource [WRST] (on)
[ 0.590398] ACPI: Power Resource [WRST] (on)
[ 0.596128] ACPI: Power Resource [WRST] (on)
[ 0.601274] ACPI: Power Resource [WRST] (on)
[ 0.606357] ACPI: Power Resource [WRST] (on)
[ 0.616308] ACPI: Power Resource [FN00] (off)
[ 0.621342] ACPI: Power Resource [FN01] (off)
[ 0.626434] ACPI: Power Resource [FN02] (off)
[ 0.631503] ACPI: Power Resource [FN03] (off)
[ 0.636591] ACPI: Power Resource [FN04] (off)
[ 0.642420] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.649544] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.659761] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
[ 0.667829] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.677424] PCI host bridge to bus 0000:00
[ 0.682131] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.689973] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.697782] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.706415] pci_bus 0000:00: root bus resource [mem 0x90000000-0xdfffffff window]

IP属地:广东

4楼2023-03-07 01:07

IP属地:广东

5楼2023-03-07 01:09

已解决，通过github上别人编译好的驱动文件传到nas上。insmod 文件，启动网卡就解决了。

IP属地:广东

来自iPhone客户端7楼2023-03-07 15:19

收起回复

日	一	二	三	四	五	六

【求助】黑群918+晖主板自带万兆网卡无法识别

登录百度账号

扫二维码下载贴吧客户端